Year One

Module Assignment: 00101-Basic Safety (Construction Site Safety Orientation)

Name
1. The four leading causes of death in the construction industry include electrical hazards, struck-by hazards, caught-in or caught-between hazards, and _____(Required)
2. A sign that has a white background with a green panel with white lettering is a ____(Required)
3. To properly dispose of oily rags, they must be _____(Required)
4. Keeping your work area clean and free of scraps or spills is referred to as(Required)
5. HAZCOM classifies all paint, concrete, and wood dust as ______(Required)
6. Under HAZCOM, if you spot a hazard on your job site, you must(Required)
7. Which of the following must be reported to your supervisor?(Required)
8. Metal ladders should NOT be used near _____(Required)
9. If you lean a straight ladder against the top of a 16-foot (4.9 m) wall, the base of the ladder should be(Required)
10. The two basic types of scaffolds are(Required)
11. Interlocking stacked material is done by(Required)
12. To reduce the risk of workers being hurt or killed by falling materials, the maximum height-to-base ratio of a stack of materials should be(Required)
13. The most common cause of death for equipment operators is(Required)
14. Most cave-ins happen suddenly with little or no warning and occur in trenches 5 feet (1.5 m)(Required)
15. In every trench over 4 feet (1.2 m) deep, there must be an exit every(Required)
16. The minimum distance that a spoil pile must be located from the edge of an excavation is(Required)
17. The type of trench protection designed to prevent trench wall cave-ins is(Required)
18. Protective guards are provided on power tools and machines in order to keep ___(Required)
19. The minimum safe working distance from exposed electrical conductors(Required)
20. Work that is performed near a hazard but not in direct contact with it is called ___(Required)
21. Circuit breakers and disconnect switches are examples of ___(Required)
22. Which of the following provide the best eye protection from all directions?(Required)
23. The type of respirator that has its own clean air supply is the ___(Required)
24. A worker can be exposed to hazardous materials by inhalation, ingestion, and ___(Required)
25. Hypothermia is a condition brought on by ___(Required)
26. When in storage, oxygen and fuel cylinders used in oxyfuel cutting must be separated by ___(Required)
27. Grease and oil must be kept away from oxygen tanks because(Required)
28. Which of these must be present in the same place at the same time for a fire to occur(Required)
29. A fire extinguisher labeled C would be used to fight a(n) ___(Required)
30. Which of the following characteristics is typical of a confined space?(Required)
This field is for validation purposes and should be left unchanged.